TP-Link TL-WA801ND - Page 2

2
" Nqikp
Yktgnguu"Ugvvkpiu"
A
dialog box will prompt you for the
Wugt" pcog and Rcuuyqtf.Ente
r
the default values and click QM.
Note
If the dialog box does not pop up, please refer to V5 in Vtqwdngujqqvkpi"on
rcig"32"to assign a static IP address 192.168.0.100 for your computer. V4
will give you some help if you forget the password.
Wugt"pcog<"cfokp"
Rcuuyqtf<"cfokp"
Click QM"
A
fter successfully logging in, the
Quick Setup page will display.
Open your web browser, type in
3;4038:020476 in the address
bar and press Gpvgt.
Click Pgzv"
Note
If you click Gzkv and choose to manually configure the AP on your own need,
please note that the DHCP is enabled during the configuration, it is essential
to disable DHCP when all the settings are finished.