TP-Link TL-WDR3600 Quick Installation Guide

Hardware Connection
1
Quick Installation Guide
N600 Wireless Dual Band Gigabit Router
MODEL NO. TL-WDR3600
Conguration for Windows with Setup Wizard
2
7106503913
Package Contents
Resource CD
Ethernet Cable
Power Adapter
If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 2 for configuration.
2
Click START and the USB Printer Setup Wizard will
guide you step by step to set up the USB Printer.
TL-WDR3600
QIG
MODEL NO. TL-WDR3600
N600 Wireless Dual Band Gigabit Router
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
Select TL-WDR3600 and click USB Printer Setup.
3
Select your language from the drop-down menu.
Click START and
the Easy Setup Assistant will
guide you step by step to set up the Router.
4
Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select TL-WDR3600 and click Easy Setup Assistant.
Appendix 1: Conguring the USB Printer
The USB Printer Setup Wizard is currently supported in Windows 7 32/64bit, Windows Vista 32/64bit, Windows XP 32/64bit. Please follow
the steps below to finish the printer configuration. For Mac users, please go to our website www.tp-link.com to download the utility.
3
5
Computer
Wall Socket
4
Cable/DSL Modem
Internet
Power o your modem.
1
Connect the INTERNET port on your Router to the Modem’s
LAN port with an Ethernet cable.
2
To use the Router to share les or printer, plug an external USB hard
drive/USB ash disk into the USB port, or connect a USB printer to the
USB port. For specic conguration procedures of the USB Printer,
please refer to Appendix 1.
Connect your computer to one of the ports labeled 1~4 on
the Router with an Ethernet cable.
3
Power on the modem and wait for one minute.
4
Plug the provided Power Adapter into the Power jack and
the other end to a standard electrical wall socket. Press the
On/O button to power on the Router.
5
Wall Socket
Click Next and go on to install TP-LINK USB Printer
Controller．Then follow the instructions step by step.
3
Click Finish on nal screen to complete the
installation for TP-LINK USB Print Controller.
4
For more details about the conguration of USB Storage/FTP Server/Media Server functions for USB ports, please refer to User Guide in the resource CD.
For more details about the Print server, please refer to Print Server Application Guide downloaded from our website: www.tp-link.com.
2
Printer/MFP/Scanner
USB ash disk
USB hard drive
* Some USB hard drives that work at a high
power without using any external power
adapter might not be supported.

TP-Link TL-WDR3600 Specifications

General

VPN support	PPTP, L2TP, IPSec
Ethernet LAN	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u, IEEE 802.3z
Receiver sensitivity	270M_2.4G: -70dBm, 195M_2.4G: -71dBm, 130M_2.4G: -74dBm, 54M_2.4G: -79dBm, 6M_2.4G: -94dBm, 270M_5G: -67dBm, 195M_5G: -70dBm, 130M_5G: -73dBm, 54M_5G: -79dBm, 6M_5G: -92dBm
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Rack mounting	-
Frequency range	2.4 - 5 GHz
xDSL connection	No
Power requirements	12VDC / 1.5A
USB ports quantity	2
Compatible operating systems	Microsoft Windows 98SE, NT, 2000, XP, Vista, Windows 7, MAC OS, NetWare, UNIX, Linux
Ethernet LAN (RJ-45) ports	4
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Antenna connector type	RP-SMA
Certification	CE, FCC, IC, RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Product color	Black

Weight and Dimensions

Depth	160.6 mm
Width	243 mm
Height	32.5 mm
Weight	- g