TL-WN321G 54M Wireless USB Adapter User Guide
- 29 -
Figure 5-4
Step 8. In the prompt page shown below, select Use the Following IP Address, and set the IP
and Subnet mask. After completing setting, click OK.
Figure 5-5
)
Note: Please set the IP address in different network segment with the other network
card to avoid conflict.
Step 9. Launch TL-WN321G Wireless Utility, then highlight the Network Name (SSID) beginning
with “PSP” in the “Network” page, and click Connect.
To Next Page
Loading...
