TL-WN7200ND 150Mbps High Power Wireless USB Adapte
23
Figure 3-31
Note:
You can also push the QSS/ WPS button on your router as hinted “You can also connect by
pushing the button on the router”. Then click Next to continue.
3. When Connected appears behind the SSID (as shown below), you have successfully
connected to the target network.
Figure 3-32
Note:
If the adapter is connected to the network for the first time, you will be asked whether to turn on
sharing or connect to devices. Please select “Yes, ...”or “No, ...” according to your Internet
environment.
To Next Page
Loading...
