TL-WR1042ND 300Mbps Wireless N Gigabit Router
z If you are visiting the router from the main computer, please select Yes, and then
click Clone MAC Address.
Figure 3-8 Quick Setup – MAC Clone
z If you are visiting the router from another computer, rather than the main computer,
please select No, and then enter the main computer’s MAC in the field WAN MAC
Address.
Figure 3-9 Quick Setup – MAC Clone
)
Note:
1. It’s strongly recommended that you visit and configure the router from the main computer.
2. To find the main computer’s MAC, please go to Start > Run on your main computer, type in
cmd and press Enter. At the command prompt, enter ipconfig/all and press Enter. The
MAC will be displayed under Physical Address.（shown in the following figure）
-12-
To Next Page
Loading...
