TL-WR702N 150Mbps Wireless N Nano Router
- 18 -
Figure 3-12 Quick Setup – MAC Clone
¾ Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP
assigned.
In this type, you should fill in the IP address, Subnet Mask, Default Gateway, and DNS IP
address manually, which are specified by your ISP. Then click Next and proceed to Figure
3-14.
Figure 3-13 Quick Setup - Static IP
3. Click Next, you will see the Finish page as shown in Figure 3-14. Click the Reboot button to
make your wireless configuration take effect and finish the Quick Setup.
Figure 3-14 Quick Setup – Finish
To Next Page
Loading...
