TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 162 -
6.9.5 Reboot
Choose menu “System Tools → Reboot”, and then you can click the Reboot button to reboot
the Router via the next screen.
Figure 6-36 Reboot the Router
Some settings of the Router will take effect only after rebooting, including:
¾ Change the LAN IP Address (system will reboot automatically).
¾ Change the DHCP Settings.
¾ Change the Wireless configurations.
¾ Change the Web Management Port.
¾ Upgrade the firmware of the Router (system will reboot automatically).
¾ Restore the Router's settings to factory defaults (system will reboot automatically).
¾ Update the configuration with the file (system will reboot automatically.
6.9.6 Password
Choose menu “System Tools → Password”, and then you can change the factory default user
name and password of the Router in the next screen as shown in Figure 6-37.
Figure 6-37 Password
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick Setup
will be prompted for the Router's default user name and password.
To Next Page
Loading...
