Step 2 Click System Tools ->Firmware Upgrade, click the Browse button to choose
the firmware you already extracted in the folder.
Step 3 Click the Upgrade button. The device will reboot automatically after the
upgrading has been finished. Please wait about 3 minutes.
Step 4 Click Status, verify that the router’s firmware has been upgraded.
Step 5 It is recommended that restoring the device to factory default to make the new
functions take effect; Click System Tools->Factory Defaults, Click Restore Button.
Step 6 After restoring factory default, please login http://192.168.1.1 and re-enter the
settings you have written down before upgrading.
To Previous Page
Loading...
