EasyManua.ls Logo

TP-Link TL- WR740N - Page 95

TP-Link TL- WR740N
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Click the Save button to save your settings.
4) PPPoEv6
Figure 4-85 PPPoEv6
PPPoE Session - The PPP session type for IPv6 connection. There are two types:
Share with PPPoEv4 - The PPPoEv6 and PPPoEv4 use the same PPP session.
Create a new Session - The PPPoEv6 and PPPoEv4 use different PPP sessions. It is
default to select this option.
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
IPv6 Address - Enter the IPv6 address in dotted-decimal notation provided by your ISP.
Default Gateway - Enter the default gateway in dotted-decimal notation provided by your ISP.
MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value is 1492 Bytes.
For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be
done unless you are sure it is necessary for your ISP connection.
Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
85

Table of Contents

Other manuals for TP-Link TL- WR740N

Related product manuals