58
Chapter 4
2. Go to IPv6 Support > IPv6 Setup.
3. Select the WAN Connection Type according to your ISP network topolopy:
• SLAAC - Connections which use RADVD IPv6 address assignment.
• DHCPv6 - Connections which use dynamic IPv6 address assignment.
• Static IPv6 - Connections which use static IPv6 address assignment.
• PPPoEv6 - Connections which use PPPoEV6 that requires a username and
password.
• Tunnel 6to4 - Connections which use 6to4 address assignment.
SLAAC
• IPv6 Address - The IPv6 address assigned by your ISP dynamically.
To Next Page
Loading...
