approximately 8 seconds, and then release the button and wait the router to reboot to its
factory default settings.
Wi-Fi/WPS: This button is used for both WPS and Wi-Fi function.
Used as Wi-Fi button:
Press this Wi-Fi/WPS button for more than 2 seconds to turn on or off the wireless function
of your router.
Used as WPS button:
Press this Wi-Fi/WPS button less than 2 seconds, and immediately press the WPS button
on your client device. The WPS LED of the router should change from flashing to solid on,
indicating successful WPS connection.
WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet.
Wireless antenna: To receive and transmit the wireless data.
1,2,3,4 (LAN): These ports (1,2,3,4) connect the Router to the local PC(s).
-5-
To Next Page
Loading...
