10
Chapter 2
Connect to the Internet
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.
4. Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for
password, and then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to menu Tools
> Internet Options > Connections > LAN Settings, in the screen that appears, untick the Using Proxy checkbox,
and click OK.
5. After successfully login, go to Advanced > Operation Mode and select Access Point
mode, then click Save.
6. Enjoy! Connect to the wireless network by using the SSID (network name) and
password of the router.
To Next Page
Loading...
