57
Chapter 4
Configure the Router in Wireless Router Mode
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System Tools > Time Settings.
3. Configure the system time using the following methods:
Manually: Select your time zone and enter your local time.
Get from PC: Click this button if you want to use the current managing PC’s time.
Get from the Internet: Click this button if you want to get time from the Internet. Make
sure your modem router can access the Internet before you select this way to get
system time.
4. Click Save.
5. After setting the system time, you can set Daylight Saving Time according to your
needs. Tick the checkbox to enable Daylight Saving Time, set the start and end time
and then click Save to make the settings effective.
4. 10. 2. Diagnostic
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System Tools > Diagnostic.
To Next Page
Loading...
