EasyManua.ls Logo

TP-Link TL-WR902AC - System Tools; Working Mode

TP-Link TL-WR902AC
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR902AC
AC750 Wireless Travel Router
- 121 -
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
5.7 System Tools
Choose menu System Tools, and then you can see the submenus under the main menu:
Working Mode, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore,
Reboot, Password and System Log. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
5.7.1 Working Mode
Choose menu System Tools
Working Mode, check Control the system mode by
software and then you can see the following screen.

Table of Contents

Other manuals for TP-Link TL-WR902AC

Related product manuals