16
2) Configure your IE browser
Now, try to log on to the Web-based configuration page again after the above
settings have been configured. If you still cannot access the configuration page,
please restore your Router’s factory default settings and reconfigure your Router
following the instructions of this QIG. Please feel free to contact our Technical
Support if the problem persists.
T4. What can I do if I cannot access the Internet?
1) Check to see if all the connectors are connected well, including the telephone
line (for your modem), Ethernet cables and power adapter.
2) Disconnect the Router and directly connect your computer to the Modem and
try to access the Internet. If you still cannot access the Internet, please contact
Open your IE browser, click
Tools tab and you will see
the following screen.
Click Internet Options
Click OK
Select Never dial
a connection
To Next Page
Loading...
