TL-WR941ND Wireless N Router
Figure 3-7 Quick Setup – PPPoE
¾ User Name and Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
¾ Confirm Password - Re-enter the password provided by your ISP to ensure the
Password you entered is correct. If the Password is different from the Confirm Password,
the screen will appear as shown below. Click OK, and re-enter the Password and
Confirm Password.
2） If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-8. Then you can go on with the wireless configuration.
¾ If you are visiting the Router from the main computer, please select Yes, and then click
Clone MAC Address.
Figure 3-8 Quick Setup – MAC Clone
¾ If you are visiting the Router from another computer, rather than the main computer,
please select No, and then enter the main computer’s MAC in the field WAN MAC
Address.
-12-
To Next Page
Loading...
