Need help?Do you have a question about the TPL PA6-1AE and is the answer not in the manual?
Provides further details and suggests consulting FCC publications for regulations.
Details the tuning procedure for the PA6-1AE model, including steps and required equipment for alignment.
Provides the tuning procedure for the PA6-1BE model, listing steps and necessary adjustments for optimal performance.
Outlines the tuning steps for the PA6-1FE model, specifying adjustments for maximum power output and minimum current.
Describes the PA Predriver module (P/N 1002), its gain, input/output matching, and DC isolation.
Details the PA Driver module (P/N 1003), its gain, input/output matching, and DC isolation.
Explains the seven-pole low-pass filter, its function, and attenuation capabilities.
Describes the optional carrier-operated relay, its activation, and applications.
Lists components for the main UHF chassis, including fuses, connectors, and diodes.
Components list for the UHF Pre-Driver module (P/N 1002), including capacitors, resistors, and transistors.
Lists components for the UHF Driver/Final module (P/N 1003), including capacitors, resistors, and chokes.
Components for the Two-Way Power Splitter and Combiner modules (P/N 100237-1, P/N 100237-2).
Parts list for the VHF/UHF Carrier Operated Relay module (P/N 100316), including circuit boards and components.
To Next Page
General