©2000 Trace Engineering
SAVE THESE INSTRUCTIONS
iii
This product contains no user-serviceable parts. Do not attempt to repair
this unit.
Do not mount this device in unventilated enclosures or in an engine
compartment.
Protect the device from splashing when used in vehicular applications.
To reduce risk of electric shock, disconnect all wiring before attempting any
maintenance or cleaning.
Additional AC disconnects may be required as part of the system installa-
tion. Consult local and national electrical code requirements.
Over-current Protection, provided by a 25 amp circuit breaker, protects the
AC input/output wiring. This circuit breaker is branch circuit rated and has a
10,000 AIC rating, suitable for residential and commercial applications.
This unit is designed to be horizontally wall mounted.
The AC input and output neutral conductors are not connected (bonded) to
the chassis.
The AC input and output HOT conductor are not isolated from each other.
The chassis housing of the T240 must be connected to a permanent
grounding system as required by the National Electric Code, ANSI/NFPA 70-
1996. This is the responsibility of the system installer. A grounding terminal
strip is provided for connection of equipment grounding conductors.
UL rated as an indoor enclosure.
UL listed for sale in the U.S. and Canada under Photovoltaic Power System
Accessaries (UL1741) and Canadian standard for general use power
supplies (CSA C22.2 No. 107.1-95).
To Next Page
Loading...