Installing Lead Acid Batteries in SafePace Evolution Signs
• Slide the white connector onto the BLACK (-) negative terminal.
TIP: The signs have been wired so that each connector should only be able to reach the nearest
terminal. As as long as the batteries are properly positioned, there should be no issues with making the
proper connections.
7. When you are finished, you can close, and latch, the sign enclosure.
WARNING: It is vitally important, whenever you close the sign, that you close and lock all of the latches
properly to avoid water infiltration as this could damage the sign and void your warranty.
SafePace® Evolution12 Installation Guide p. 28
To Next Page