CHALLENGER 200UTV P. D. I
11
2.7 Install the front light cover: attach the front light cover on the frame
and install it on the frame with M6X16 bolts and M6 nuts.
2.8 Plug the headlight and turn lights’ wire: plug the wires with the
connecting sockets; tighten the wires using zip ties.
2.9 Install the steering wheel: Use the M6x12 bolts to install the steering
wheel onto the steering shaft, put on the steering bolt cover
2.10 Adjust the steering wheel angle: loose the adjustment nut as shown
in the picture, adjust the steering wheel to a comfortable height, tighten
To Next Page
Loading...