Need help?Do you have a question about the TRAK RACER TR160 and is the answer not in the manual?
Identify and lay out all individual parts required for sim rig assembly.
Position 1400mm profiles and remove red striping for the base frame.
Securely attach the feet to the main base frame profiles using M8x25 bolts.
Install parts onto the 500mm middle profile before frame integration.
Connect the 500mm end profile to the frame using specified hardware.
Mount two 580mm vertical profiles onto the existing frame structure.
Install the seat slider and brackets, ensuring smooth rail operation.
Attach the seat to its bracket and verify adjustable seating position.
Add the 780mm profiles to the sim rig structure as per instructions.
Connect the 580mm and 400mm side profiles to the rig.
Attach the shiftermount and its L-shaped bracket to the frame.
Mount the standard wheeldeck onto the sim rig frame.
Mount the direct drive wheeldeck assembly onto the sim rig.
Mount the Fanatec direct drive wheeldeck assembly.
Attach pedal plate side supports and position the pedal plate.
Insert T-Nuts and tighten the main upright structure with handles.
Install end caps on all exposed profile and bracket ends.
General| Brand | TRAK RACER |
|---|---|
| Model | TR160 |
| Category | Video Game Chairs |
| Language | English |
To Next Page
