English 6
Hold the orange button down until it flashes green
three (3) times and then the light goes out.
Your Device is now OFF.
Now that my Device is activated, How do I turn my
Trakdot™ on and off and use it?
To turn on your Trakdot™
Press the orange button in the center for 3-5 seconds
only until the red light goes on. It will stay on for 10-15
seconds and then go out.
Within 10-15 seconds, the device will connect to the
network, the light will turn to a green light that will
blink 3-4 times and then go out.
Your Device is now on. (Note: the blinking green
light will turn off after the 3-4 blinks. This conserves
battery power even though your Device is turned on
and operating.) When you want to check if your Device
is ON, simply press lightly on the orange button in the
center of your Device and, if the green light blinks,
then your device is ON.
1
2
To Next Page
Loading...