Need help?Do you have a question about the Trampoline pro Jump Slammer and is the answer not in the manual?
General| Brand | Trampoline pro |
|---|---|
| Model | Jump Slammer |
| Category | Sports & Outdoors |
| Language | English |
Insert two Horizontal plates into the Basketball bracket with net, securing with Rim Pin.
Insert Flex Rod Thin into Clip Rod and connect Flex Rod with connector.
Bend the flex rod and insert the rod ends into the Horizontal plates.
Insert the Clip Rod end into the tube.
Slide the Backboard with net onto the Flex Rod frame.
Insert the Fixed Support pole into the Adjust Bracket.
Attach the Fixed Support pole to the enclosure pole using securing brackets, bolts, and twist knobs.
Place the Basketball Rim with net onto the Adjustment Bracket and secure with the adjustment bracket pin.
Adjust the backboard angle using the adjustment knob until vertical to the ground.
Connect the Backboard with Net to neighboring enclosure system poles using ties.
To Next Page