Rigging and Handling
The forks must only be applied under the unit base frame and
not against the unit base frame. The lift point should be as
near as possible to the centre of gravity (see Figures 4 ,5 and
6). In the case of larger units the use of several forklift trucks
may be required.
Use extended fork lifting to prevent :
• Drain pan damages during handling.
• Base panel and structure damages.
• Coil header and other protrusion part damages.
Forklift Trucks
Units fitted with base frames may be moved on roller trolley or
tubular rollers (see Figure 7 & 8).
Roller Movement
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
10
To Next Page
Loading...
