General Information
These installations, operation and maintenance
instructions are given as a guide to good practice
in the installation, commission into service,
operation and periodic maintenance by the user, of
TRANE Quantum
TM
Air Handler. They do not
contain full service procedures necessary for the
continued successful operation of this equipment;
the services of a qualified technician should be
employed through the medium of a maintenance
contract with a reputable service company.
Trane’s standard warranty covers the equipment.
It does not cover damage due to misuse, lack of
maintenance, or failure to comply with the
manufacturer’s instruction or recommendations.
Foreword
Warranty
TRANE Quantum
TM
Air Handler are Central
Station Air Handlers designed for a variety of
controlled air application.
The basic unit consists of a fan, heating and/or
cooling coils, filters and air dampers. See product
catalogue for list of available modules and options.
The TRANE Quantum
TM
Air Handler are designed
for cooling load conditions of 1000-65000 nominal
CFM. Fans are double width, double inlet,
centrifugal types with forward curved, backward
curved, and airfoil blade designs. To insure fan
motor assembly stability the unit ships with
shipping brackets located between the fan support
frame. These spacers must be removed prior to
fan operation, to assure proper vibration isolation.
Units ships as complete units, section or
subassemblies. Each section is provided with a
nameplate (label) which includes types of section,
units serial number, customer tag number and unit
model number.
Unit Description
5
To Next Page
Loading...
