Trane Odyssey Series - Symbio Controller Operation and Maintenance; Symbio Mobile Application Usage

SS-SVN016A-EN
31
Symbio Service and Installation Mobile Application
The Symbio Installation and Service tool is required to view and edit the following:
• Equipment configuration
• Historical alarms
• Firmware updates
• Backup and restore
• Building Automation System configuration
For more detailed information on the Symbio Service and Installation Mobile Application, refer to
the Quick Start Guide for Symbio Service and Installation - BAS-SVN043*-EN.
Download Mobile App
To download the Symbio Service & Installation mobile app:
1. Access the Apple App Store or Google Play store by scanning the QR code below or clicking
one of the download links.
• Apple download link
• Google Play (Android) download link
2. Navigate to the Apple App Store or Google Play Store on your mobile device.
3. Search for TTrraannee SSyymmbbiioo to locate the Symbio Service & Installation app.
4. Download and install the app.
Figure 13. Symbio Service & Installation app
Connecting to the Symbio 700
Required Tools
• 5/16 inch nut driver tool for panel removal
• Smart devices supported:
– iPhone®
– Android™
• Trane Symbio Service & Installation mobile app
Connecting to the Symbio 700 Controller
1. Enable BBlluueettooootthh on your smart device.
2. Access the Symbio 700 controller in the low voltage portion of the equipment.