SS-SVN016A-EN
33
Figure 16. Login screen
6. On the login screen, press SSkkiipp in the lower right-hand corner of the screen. Or Trane
personnel can login using their Trane Connect user name and password.
7. On the Unit List page, select the Symbio 700 controller to pair with. If the controller is not
listed, press the refresh arrow in the upper right-hand corner of the screen.
NNoottee:: If a Symbio 700 is not the original Symbio controller as shipped with the equipment, the
Bluetooth equipment list will list the controller serial number, instead of the equipment
serial number.
8. When prompted, pair the app to the Symbio 700 controller. A popup message displays a 6-
digit random number. The same number is shown on the display of the Symbio 700
controller until the pairing is complete, allowing the user to confirm connection to the
intended controller.
Figure 17. Bluetooth Pairing
9. Press on the Symbio 700 on-board keyboard/display to complete the pairing.
When the LED light is a solid blue and the display reads Bluetooth Connected, the Bluetooth
pairing and connection is complete.
SSyymmbbiioo SSeerrvviiccee aanndd IInnssttaallllaattiioonn MMoobbiillee AApppplliiccaattiioonn
To Next Page
Loading...