Trane Symbio 700 - Status; Active Setpoints

126
Status
Active Setpoints
Cooling Capacity Enable - Active
Cooling Capacity Setpoint BAS - Active
Cooling Capacity Setpoint Enable BAS - Active
Cooling Demand Limit Capacity Enable Setpoint - Active
Cooling Lockout BAS - Active
Demand Limit Request - Active
Demand Shed Offset Setpoint - Active
Discharge Air Cooling Setpoint (Target) - Active
Discharge Air Temperature Maximum Cool Limit - Active
Discharge Air Temperature Minimum Cool Limit - Active
Discharge Air Temperature Setpoint Active
Emergency Override BAS - Active
Filter Runtime Hours Setpoint - Active
Heat Cool Mode Request - Active
Heat Lockout Command - Active
Heat Primary Enable BAS - Active
Heat Pump Heating Lockout Setpoint - Active
Heating Capacity Setpoint BAS - Active
Heating Capacity Setpoint Enable BAS - Active
Heating Demand Limit Capacity Enable Setpoint - Active
Occupancy Request Active
Occupied Standby Cooling Setpoint BAS - Active
Occupied Standby Heating Setpoint BAS - Active
Space Temperature Cooling Setpoint Input Active
Space Temperature Heating Setpoint Input Active
Space Temperature Setpoint Active
Space Temperature Setpoint Input Active