141
Interconnecting Wiring Between Condensers and Air Handlers
Interconnecting Wire Info.
Note: If you have a VFD with a Symbio Condenser you must run BOTH Adapter Board J15-3 & 4 to Relay
Board J4-3 & 4 and Adapter Board J16-1 & 2 to Relay Board J7-1 & 2 twisted pair!
“Officially” Allowed Pairings
Symbio Condenser with a Symbio CV Air Handler = Pairing A
Symbio Condenser with a Symbio SZVAV / 2-Speed Air Handler = Pairing B
Legacy Electromechanical Condenser with a Symbio 2-Speed Only Air Handler = Pairing C
Symbio Condenser with a Legacy CV Air Handler
Symbio Condenser with a Legacy 2-Speed Air Handler
Legacy Electromechanical Condenser with a Symbio CV Air Handler
Legacy Reliatel Condenser with a Symbio CV Air Handler
To Next Page
Loading...
