Trane Symbio 700 - Circuit 2

29
Circuit 2
Compressor 2 run command from UC P9-5 to Adapter Board J20-11.
Then to Adapter Board J11-1 by board trace.
Out to the HPC and back to Adapter Board J11-2.
Then to Adapter Board J11-3 by board trace.
Out to DTL and back to the Adapter Board J14-4.
Then to Adapter Board J7-3 by board trace, then out to CC2 coil.
The Proving Circuit is J5-1 to J22-3 through the Aux switch, to J22 -4 then to J20-9.
.