Refreshing the Event Log
BMTX-SVU01B-EN 123
To manually refresh the event log at the Event Log or Error Log
tab:
◆ At the appropriate event log tab, click the Refresh button (see
Figure 109).
Figure 109. Refreshing the Event Log
To manually refresh the BCU event log:
◆ Click the Go button (see Figure 108 on page 122).
Click Refresh to display the latest version of the event log
Note:
When you close an event log and return to it later, the Event
Log and Error Log tabs update automatically.
Expanded Message button
To Next Page
Loading...
