Filtering the Event Log
BMTX-SVU01B-EN 127
Hiding Columns
1. To hide or show columns, right-click on a column head. A pop-up
menu displays (see Figure 114).
Figure 114. Hide or Show Pop-up Menu
2. From the pop-up menu, click the desired option. When you exit the
site, your changes are automatically saved.
Filtering the Event Log
You can make the event log display only the alarms and events that meet
specific criteria. This is called “filtering.” Alarms and events that do not
match the criteria do not appear in a filtered event log.
You can filter at the Event Log or BCU Event Log tab. The procedures are
the same unless otherwise noted.
To enable filtering:
1. At the Event Log or BCU Event Log tab, click the Enable Filtering
checkbox (see Figure 115).
Figure 115. Event Log Tab with the Enable Filtering option activated
Note:
The following columns cannot be hidden: Date/Time, Event
Type, Ack. Reqd., and Detail.
Enable Filtering
checkbox
Select Filter
Criteria area
To Next Page
Loading...
