Deleting Alarms and Events
BMTX-SVU01B-EN 135
Figure 124. Save Event Log As Window
2. The default file name for the event log is the tab name and the cur-
rent date (selected tab-mmddyy). To change the file name, click the
File Name field and type the new name.
3. The Save as Type default is Tab Delimited (*.txt). You can save the
event in this format, or you can choose the Comma Separated Value
(*.csv) option. To choose the Comma Separated Value option, click the
Save as Type selection arrow to display a list of file types, then select
Excel Comma Delimited (*.csv).
4. Click Save.
Deleting Alarms and Events
You can delete the entire event log, as well as selected alarms or events.
For example, you may want to shorten the event log by deleting unimpor-
tant events like operator logons and logoffs and “nuisance” messages
(such as those that indicate when pumps cycle on and off).
Step 2
Step 3
Step 4
Note:
• To open a saved event log Excel file (.csv or .xls), use
Microsoft Excel.
• To open a saved event log text file (.txt), use a text editor
such as Microsoft Wordpad.
Note:
You cannot delete a Tracer Summit BCU alarm that requires
acknowledgment until it has been acknowledged. For more infor-
mation on acknowledging alarms, see the section “Acknowledging
an Alarm” on page 120.
To Next Page
Loading...
