Using the Trend Viewer
188 BMTX-SVU01B-EN
Trend Viewer Main Control Buttons
The Trend Viewer main control buttons allow you to control and adjust
the chart. It puts the chart into live mode and allows you to select the
date range, move the chart forward or backward, and save current and
new trend objects. Table 2 describes the functions of the Trend Viewer
main control buttons.
Table 2. Functions of the Trend Viewer Main Control Buttons
Button Description
The back button moves the displayed data backward
half the displayed date range. (The button is disabled if
the view is in live mode).
The play button puts the chart into live mode and
allows you to track the data as it enters the database
source for existing members. For new members, the
data is plotted every 30 seconds.
The pause mode button temporarily stops the chart
from updating with new data. This button only displays
after the play button has been depressed.
The forward button moves the displayed data forward
half the displayed date range. (This button is disabled if
the user is in live mode).
The Select Range button displays the Date Range to
Display dialog box (see Figure 23 on page 189). Use this
dialog to select the date-range of data to load into the
chart.
The Close button exits the Trend Viewer and returns to
the previous window.
The Save button saves changes made in the Trend
Viewer. If the point cannot be saved because communi-
cation to the device is down, reconnect and then try
again.
The Open Another button allows you to view another
Trend Viewer object without closing the existing one.
Click on the Help button for more information about the
Trend Viewer.
To Next Page
Loading...
