Backing up Tracer Summit
196 BMTX-SVU01B-EN
5. To change the name of the backup file, type the new name in the File
Name field.
6. Click Save. The Backup Site dialog box displays again (see Figure 28).
Figure 28. Backup Location Dialog Box
7. Select the site or group you want to backup up in the Available Loca-
tion(s) list.
8. Click Add. The sites or groups display in the Selected Location(s) list.
Note:
Keeping backup copies on disks allows you to restore the sys-
tem if a new hard drive is installed.
We recommend that you save multiple backup files using dates
and location names as file names (for example, 06.22.2004 site-
name.bdb).
Step 7
Step 8
Step 9
Note:
• To select all the sites or groups in the Available Location(s)
list for backup, click Add All.
• To remove a site or group from the Selected Location(s) list,
select the site or group then click Remove.
• To remove all the sites or groups from the Selected Loca-
tion(s) list, click Remove All.
• To cancel the backup process, click Cancel.
To Next Page
Loading...
