Changing Chiller Plant Status Information
208 BMTX-SVU01B-EN
Viewing Chiller Plant Control Status
◆ From the Status menu, select Chiller Plant Control Status (see
Figure 42).
Figure 42. Status Menu
• If only one chiller plant object exists for the current site, the
Chiller Plant Control Status System screen displays.
• If more than one chiller plant object exists for the site, the Select
Chiller Plant Control window displays, allowing you to select the
proper chiller plant object. Click the appropriate chiller plant,
then click OK.
The Chiller Plant Control Status System screen is shown in Figure 43 on
page 209.
Note:
This menu selection is not available if no chiller plant object
exists in the site.
To Next Page
Loading...
