Trane TRACER SUMMIT BMTX-SVU01B-EN - Resetting All Chiller Plant Failures

Resetting Chiller Failures
BMTX-SVU01B-EN 211
Resetting All Chiller Plant Failures
1. From the Status menu, select Chiller Plant Control Status. The
Chiller Plant Control Status System screen displays (see Figure 46).
If a failure exists, the message “Failure Exists” displays in red in the
Operating Mode field.
Figure 46. Chiller Plant Control Status System Screen
2. Click Failures. The Failures dialog box displays (see Figure 47 on
page 212).