Changing Chiller Plant Status Information
214 BMTX-SVU01B-EN
Making a Chiller Unavailable
1. From the Status menu, select Chiller Plant Control Status. The
Chiller Plant Control Status System screen displays.
2. Click the Chillers tab to display to the Chillers screen (see Figure 44
on page 210).
3. Click the name of the chiller you want to become unavailable. If the
chiller is currently available, the button below the list of chillers is
labelled Make Unavailable.
4. Click the Make Unavailable button. The button changes to Make
Available. The next time the Chiller Plant Control runs, the text in
the Chiller Available column of the table changes to No.
Making a Chiller Available
1. From the Status menu, select Chiller Plant Control Status. The
Chiller Plant Control Status System screen displays.
2. Click the Chillers tab to display to the Chillers status screen (see
Figure 44 on page 210).
3. Click the chiller name to highlight the chiller you want to become
available. If the chiller is currently unavailable, the button below the
list of chillers is labelled Make Available.
4. Click the Make Available button. The button changes to Make
Unavailable. The next time the Chiller Plant Control runs, the text in
the Chiller Available column of the table changes to Yes.
Note:
A chiller is available only if both the button and a programmed
referencer make it available. If your chiller does not change sta-
tus after you click Make Unavailable, contact your Trane Ser-
vice representative for further information.
Note:
A chiller is available only if both the button and a programmed
referencer make it available. If your chiller does not change sta-
tus after you click Make Available, contact your Trane Service
representative for further information.
To Next Page
Loading...
