Using the Tutorial within Tracer Summit Software
BMTX-SVU01B-EN 13
Accessing the Training Modules within Tracer Summit
To access the training modules, you must have the Daily Operations
Tutorial CD-ROM in the CD-ROM drive of your PC.
Schedule Training Modules
The Schedule screen is linked to the following training modules:
• Changing Daily Schedules
• Changing Exception Templates
• Practice Changing Schedules
To access the Schedule training modules:
1. Click the Schedule button on the task bar. The Select Time of Day
(TOD) dialog box displays (see Figure 9).
Figure 9. Select Time of Day (TOD) Dialog Box
2. Click on the schedule you want to select.
3. Click OK. The Schedule screen displays (see Figure 10 on page 14).
To Next Page
Loading...
