Trane TRACER SUMMIT BMTX-SVU01B-EN - Override Dialog Box Training Modules

Using the Tutorial within Tracer Summit Software
BMTX-SVU01B-EN 15
Override Dialog Box Training Modules
The Override dialog box is linked to the following training modules:
• Changing Setpoints and Overrides
• Changing Chiller Plant Status
• Practice Making Changes
To access the Override dialog box training modules:
1. Click the Override button on a graphic. The Override dialog box dis-
plays (see Figure 11).
Figure 11. Override Dialog Box
2. Click the Tutorial button to display the Tracer Summit tutorial menu
for the Override dialog box.
3. To exit the tutorial and return to the Override dialog box, click the
Quit button at the bottom of the tutorial screen (see Figure 8 on
page 12).