Using the Tutorial as a Stand-alone Training Course
BMTX-SVU01B-EN 23
Checking Your Knowledge
When you have completed the training modules or have mastered the
basic skills, you can take a final unguided test.
To check your knowledge:
1. Click Checking Your Knowledge.
2. Take the test. You must complete the entire test and pass it before
you can print a certificate of completion.
• If you passed, congratulations! Follow the instructions for print-
ing out a certificate of completion.
• If you did not pass, you should return to the course and review the
modules.
If you leave the test prior to completion, your answers are not saved. Also,
you will need to begin the test again at the first question.
Obtaining Continuing Education Credit
Successful completion of the tutorial entitles you to 0.4 continuing educa-
tion credits (CEUs).
To receive your CEUs:
◆ Send the certificate of completion along with your name and address
to your local Trane office.
The local office will forward your information to the ICS Institute. The
ICS Institute will mail back to you an official ICS Institute certificate,
showing the CEUs that have been awarded.
To Next Page
Loading...
