Task Bar
BMTX-SVU01B-EN 35
Task Bar
The task bar is made up of buttons with icons (pictures) on them, as
shown in Figure 30. Each button has a specific purpose.
You can see the full name of a button by using the mouse to move the
pointer onto the button, then waiting 1–2 seconds (do not click the mouse
button). A small window containing a description displays next to the but-
ton.
Figure 30. Task Bar
To use the task bar:
1. Move the pointer on the screen to the button representing the task
you want.
2. Click the left mouse button once. Tracer Summit performs the task.
For example, if you click the Schedule button, the scheduling screen
displays.
For more information about the task bar, see Table 2.Navigation Tree
Use this button to connect and
disconnect from a site.
This button appears when timed override is
enabled and you have security access.
Table 2. Task Bar Descriptions
Button Task Completed
Click this button once to display the previously displayed
graphic (picture) in the Tracer Summit window.
Click this button once to return to a graphic (picture) after
selecting the Back button.
Click this button once to display the main graphic (home
graphic) selected for your Tracer Summit system.
Click this button once to display the scheduling screen. For
more information about using this screen, see Chapter 8,
“Changing Schedules.”.
Click this button once to display reports. For more informa-
tion about using this screen, see Chapter 10, “Running
Reports.”.
To Next Page
Loading...
