Using Terminal Emulation Screen Options
BMTX-SVU01B-EN 47
Saving Screen Text to a File
To capture the current settings of a Tracer 100 or Tracker panel or to
troubleshoot a panel, you might want to save the text that appears in the
terminal emulation screen to a file.
To save text to a file:
1. From the terminal emulation screen, click the Capture Text button.
The Output To dialog box displays (see Figure 41).
Figure 41. Output To Dialog Box
2. Select the Output to File check box.
3. In the File field, specify where to store the file:
• Type the path of the file, including the file name
• Click the Browse button to select a path
4. Click OK. The session captures the text as it appears in the terminal
emulation window.
After the text capture begins,
• Click Stop Capture to stop capturing text
• Click Pause to temporarily stop capturing text
• Click Resume to continue capturing the information
Printing Screen Text
To capture the current settings of a Tracer 100 or Tracker panel or to
troubleshoot a panel, use the following procedure to print the text that
displays on the terminal emulation screen.
To print screen text:
1. From the terminal emulation screen, click the Capture Text button.
The Output To dialog box appears (see Figure 41).
2. Select the Printer check box.
To Next Page
Loading...
