BMTX-SVU01B-EN 51
Chapter 7
Displaying and Changing
Status Information
You can display and change system status information using Tracer Sum-
mit graphical displays, which are available with BCU sites. These dis-
plays allow you to check system status information and perform operator
overrides.
Tracer 100 sites enable you to override calculated binary and calculated
analog settings. See “Changing System Values (Overrides and Setpoints)”
on page 55 for details.
The topics that are covered in this chapter are:
• Displaying status information on graphics
• Changing system values for BCU and Tracer 100 sites
• Using the pop-up menu for graphics
Displaying Status Information on
Graphics
Live data (such as temperature and humidity) are regularly displayed on
graphics. Any data from the system can be displayed.
You can create custom graphic displays to provide a dynamic view of your
building. You can create and view graphic displays of items such as build-
ings, floor plans, and HVAC equipment. Graphic displays can be ani-
mated. For example, graphics can be displayed to simulate a damper
opening or closing.
Standard graphics are furnished for Trane equipment, such as chillers,
variable air volume (VAV) boxes, PCMs, Universal PCMs, and thermostat
control modules (TCMs). You can create customized graphics using the
included HVAC graphics library or by importing graphics from other
drawing packages such as Paintshop Pro, CorelDRAW or AutoCAD. You
Note:
References to graphics in this chapter do not apply to Tracer
100 sites.
Note:
You may not have access to all of the tasks presented in this
guide. Your access privileges depend on your user profile. Con-
tact your security supervisor for information.
To Next Page
Loading...
