Trane TRACER SUMMIT BMTX-SVU01B-EN - Changing System Values (Overrides and Setpoints)

Changing System Values (Overrides and Setpoints)
BMTX-SVU01B-EN 55
Figure 45. Clicking the Close Button to Close a Graphic
Changing System Values (Overrides
and Setpoints)
With Tracer Summit, you can change system values in several ways. With
BCU sites, you can:
• Override the status of UCM objects
• Override the status of area objects
• Override the status of analog and
binary output objects
• Change setpoints
• Change binary values
• Select from a list of values
• Override binary or analog outputs
• Release override control
With Tracer 100 sites, you can override the status of calculated binary or
calculated analog objects.
Note:
You can also close a graphic using the Tracer Summit main
menu. From the File menu, select Close Graphic.
Close button for
the graphic