Displaying and Changing Status Information
56 BMTX-SVU01B-EN
With a BCU site, you can change all of these items using different control
types within a graphical display. Figure 46 shows an example graphic
with the four main control types.
Figure 46. Control Types within a Graphic
Overriding System Values
You can override the system control of the present value property for an
object by selecting the override control. When the override control is on a
graphic, you can display status information by right-clicking on the Over-
ride control button to open either the Simplified Override dialog box or
the Advanced Override dialog box.
This gives you information on what system applications are currently
controlling the object (see Figure 52 on page 61 and Figure 62 on
page 73).
When a “hand” icon is displayed on an override button, it indicates that
the present value of the object is in manual override (see Figure 47). To
set up this feature, see “Displaying Override Status” on page 57.
Figure 47. Manual Override Icon
Override
Control
Binary
Check Box
Control
Selection
List Control
Setpoint
Control
To Next Page
Loading...
