Trane TRACER SUMMIT BMTX-SVU01B-EN - Using the Advanced Systems Override

Displaying and Changing Status Information
60 BMTX-SVU01B-EN
Accessing the Simplified Override
Dialog box
The Simplified Override dialog box can only be accessed through a
graphic. You can access it by using either the Override Control button or a
pop-up menu. With the Simplified Override dialog box you can override
the present value of:
• Analog outputs
• Multi-state analog outputs
• Binary outputs
• UCMs and applications
• Non-Trane BACnet points
Using the Override Control button
1. In a graphic, click on the Override control button (see Figure 49). The
Simplified Override dialog box displays (see Figure 52 on page 61)
.
Figure 51. Override control button
Note:
The Override control button only controls present value proper-
ties and does not have the capability to override lighting values.
To override lighting values, refer to “Overriding a Binary Out-
put or a Lighting Value” on page 67.
Override control
button