Displaying and Changing Status Information
62 BMTX-SVU01B-EN
Using the Simplified Override Dialog
Box
With the Simplified Override dialog box you can easily override the fol-
lowing:
• Analog outputs
• Binary outputs
• Multi-state analog outputs
• UCMs
• Non-Trane BACnet points
Overriding an Analog Output
1. Open the Simplified Override dialog as described in “Accessing the
Simplified Override Dialog box” on page 60. The Override dialog box
displays (see Figure 54).
Figure 54. Analog Output Override Dialog Box
Note:
Click on the More control button at the bottom of the dialog box
to display the Priority Arrays box. To perform an override, your
default control priority level must be higher than priority level
listed in the box. If not, refer to “Using the Advanced Systems
Override” on page 72.
To Next Page
Loading...
