Displaying and Changing Status Information
76 BMTX-SVU01B-EN
Figure 64. Select Area Dialog Box
2. Select an area to change the timed override status. Then click the OK
button. The Timed Override dialog box displays for the area (see
Figure 65 on page 76).
Figure 65. Timed Override Dialog Box
3. In the Timed Override Request box, click the desired option.
• Select the Start Timed Override option to start a timed override
request for the area. The timed override remains active for the
number of minutes shown on the option button description.
• Select the Cancel Timed Override option to cancel a timed over-
ride request. Timed override becomes inactive for the area.
4. Click OK to close the Timed Override screen and begin the request.
Note:
Timed override must be enabled in order for Area Control to
process a request. (To set up a timed override for an area, see
the System Programming guide.)
To Next Page
Loading...
