BMTX-SVU01B-EN 79
Chapter 8
Changing Schedules
A schedule is a set of events (instructions) that tells the HVAC (heating,
ventilating, air conditioning) equipment connected to Tracer Summit
what to do and when to do it. For example, an event in a schedule tells a
rooftop unit when to turn on and off. When you display a schedule on the
scheduling screen, you see all the events that are scheduled for a particu-
lar day.
There are three types of events in a schedule:
• Daily Events: These types of events occur every day, unless you over-
ride them with a holiday or exception. (An example daily event is a
change in building occupancy at 6 p.m.) Each day of the week can
have separate events. Any combination of days can share the same
events. For example, Monday, Wednesday, and Friday can have the
same events, and Tuesday and Thursday could each have a different
set of events or share the same events.
• Holidays: These types of events override specific daily events. You
can define specific days on which holiday events override the daily
events.
• Exceptions: These types of events override both daily events and
holidays. Like a holiday event, you can define a specific day(s) that
the exception will override.
This chapter provides scheduling information for the following sites:
• BCU panels
• Tracer 100 panels
These sets of instructions are the same for both sites except where indi-
cated.
Note:
You may not have access to all of the tasks presented in this
guide. Your access privileges depend on your user profile. Con-
tact your supervisor for information.
To Next Page
Loading...
